Gear Ratio Calculations

http://spreadsheets.google.com/pub?key=rdKZukqATZ6bUalxMke5ljQ&output=html

This is by default for an upgear kit

"5 Gear" is set to Standard PX at 23(Primary)/65(Secondary)
"4 Gear" is set to Worb 5 Upgear is 24(Primary)/65(Secondary)

You need to change these values if you want to play around with different measurements

gear_ratio_calc.xls

(22k)

Unknown user,

Mar 25, 2015, 12:01 AM

v.2

gear_ratio_calc_with_drt.xlsx

(17k)

Unknown user,

Mar 25, 2015, 12:01 AM

v.2

Comments

Disclaimer: Vespa Labs contains information that is VERY likely to wreck your scooter and possibly yourself, both intentionally (i.e. gaining more performance while sacrificing reliability + safety) and unintentionally (i.e. misleading or incorrect information). Vespa Labs originated as a public wiki and is only a collection of random notes and intended as a dumping ground for information and not as a properly reviewed source. The same disclaimers that wikipedia.org use apply to Vespa Labs. Also be aware that Vespa Labs is an international site and therefore may contain information that is not road legal in some countries/states and may also invalidate insurance policies. Treat all information as experimental and for "race use only" (i.e. not for road use - even if it is implied or explicitly stated). Refer to and adhere to your local road and legal rules, as well as the manufacturers recommendations
The short version: using this information is at your own risk