Unimig Panther 120 Mig Welder

My new baby is a gas/gasless MIG welder. The idea is that I learn how to weld well for small jobs (such as an expansion chamber with thin metal). For big jobs I can hire a welder being confident I have the skills to do a job in 24 hours.

mini%20120.jpg

Setup Notes

Welding custom exhaust 1.6mm mild steel

Supagas Argon 07
Gas rate 25-30 litres/min
0.6 mm wire
Feed rate 6
Power setting "A" "2" "Min"

=mini2520120.jpg

(8k)

Unknown user,

Mar 24, 2015, 11:27 PM

v.12

PICT1311 (Large).JPG

(144k)

Unknown user,

Mar 24, 2015, 11:27 PM

v.2

PICT1312 (Large).JPG

(126k)

Unknown user,

Mar 24, 2015, 11:27 PM

v.2

Product Guide_2006 2.pdf

(377k)

Unknown user,

Mar 24, 2015, 11:27 PM

v.2

mini20120.jpg

(8k)

Unknown user,

Mar 24, 2015, 11:27 PM

v.2

Comments

Disclaimer: Vespa Labs contains information that is VERY likely to wreck your scooter and possibly yourself, both intentionally (i.e. gaining more performance while sacrificing reliability + safety) and unintentionally (i.e. misleading or incorrect information). Vespa Labs originated as a public wiki and is only a collection of random notes and intended as a dumping ground for information and not as a properly reviewed source. The same disclaimers that wikipedia.org use apply to Vespa Labs. Also be aware that Vespa Labs is an international site and therefore may contain information that is not road legal in some countries/states and may also invalidate insurance policies. Treat all information as experimental and for "race use only" (i.e. not for road use - even if it is implied or explicitly stated). Refer to and adhere to your local road and legal rules, as well as the manufacturers recommendations
The short version: using this information is at your own risk